Category Archives: Uncategorized

February 10, 2020 Soldering Before turning on the soldering iron, take the sponge from underneath it and red it down so you can use it to clean the tip of the soldering iron and open a window to let out some of the fumes. After you are done soldering, if there is no one directlyContinue reading “Analog Lab Report 3”

February 3, 2020 Resistors Troubleshooting notes found here Resistor #1 Color codes: Brown / Black / Orange / Gold Stated resistance value: 10 KΩ Tolerance: ±5% Min/max possible resistance: 9.5 KΩ – 10.5 KΩ Actual measured resistance: 10.07 KΩ Resistor #2 Color codes: Yellow / Violet / Orange / Gold Stated resistance value: 47 KΩContinue reading “Analog Lab Report 2”

January 27, 2020 Breadboards When looking at a breadboard you will see it almost looks as if it is divided into different sections. The two outside panels have power and ground columns and the two inside panels connect different components of your circuit together. The red line on the outer panels indicates that the columnContinue reading “Analog Lab Report 1”